BRECON has been a leading manufacturer of vibration technology and serving concrete assiduity for further than two decades. BRECON’s product point is in Cologne, Germany. Brecon has entered into a contractual agreement with CONTROLS for the deals of concrete testing machines in Germany, Austria, and Switzerland. This complements Bepete’s expansive range of products with a veritably strong portfolio of CONTROLS, a famed manufacturer for over 50 times. Within the first six months of the cooperation, multitudinous testing machines were delivered to guests in Germany, Austria, and Switzerland. Client interest covers the complete diapason of products and operations. Then we present three testing machines that can be described as crucial products.
We Created A Step-by-step Guide To Select The Right Compression Machine
Compression Testing Machines

Compression testing machines are one of CONTROLS ’ strengths in the fiercely competitive global business. The contraction testing machines are available in frame sizes from 2000 kN to 5000 kN test force. The test frames impress with their effective and compact design and therefore bear little space in the laboratory. The tackle and firmware misbehave with all current transnational concrete testing norms, including EN 12390- 4 and ASTM C39. Brecon was suitable to bespeak the first client order as early as the end of 2021 and deliver the contraction testing machine in January 2022.
After the DAkkS estimation according to noise EN ISO 7500- 1 passed off to their complete satisfaction, the concrete factory group ordered an alternate contraction testing machine for an alternate position. Due to the veritably good reference, further guests were induced by the Controls contraction testing machines. The testing machine is intimately, snappily, and fluently handled by the driver via a 7-inch colour display, which allows time-saving, completely automatic test prosecution.
The testing chamber of the machine provides space for testing concrete cells with edge lengths of 100 mm, 150 mm, and 200 mm, as well as concrete cylinders with confines Ø 100 mm and 150 mm, heights of 200 mm, 300 mm, and 320 mm, using spacers. A veritably compact overall result for test laboratories can be enforced via fresh measuring channels by adding farther test frames, similar as for mortar tests and/ or flexural tensile tests for concrete shafts.
Digital Mortar Mixer
The digital CONTROLS mortar mixer with a volume of 5 liters in agreement with EN 196 is a sophisticated device that’s used worldwide in large figures as an introductory outfit for laboratories. therefore, Brecon was also suitable for delivering knockouts of units to concrete shops in all three countries( D/ A/ CH) within the first six months.
The mortar mixer has a stoner-friendly display and a clear stoner interface. It’s also immaculately suited for individual uses outside the norm. The two mixing pets of 140 or 285 rpm are available from the plant in agreement with the standard. still, the mixing speed can also be named collectively, indeed during the mixing process. To cover the driver, the mixer stops automatically as soon as the defensive grid is opened during operation. The mixer is available with a program automatic and individual mixing cycles can be programmed.

Concrete Gyrator Compactors (Rotary Compressors)

The Galileo gyratory compactor from CONTROLS is a model for cement and concrete that covers utmost operations veritably well, indeed in its introductory interpretation. The veritably popular system especially in Scandinavia, is used for form design and quality control substantially in concrete shops where concrete with low plasticity is used( exemplifications concave core crossbeams, pipes, and paving monuments). The system is used for blend design, simulation of named product processes, sample medication for strength tests( fresh and cured), and exploration into blend-related marvels( plasticity, curing time, cocktails, etc.).
The contemporaneous operation of low static pressure and a shear action achieves contraction that results in a movement of the center line of the instance, creating a conical face of revolution, while the ends of the instance remain roughly vertical to the axis of the conical face. The machine is equipped with a 100 mm periphery mold and a scraper and processes in real-time the elaboration of the sample viscosity as a function of the number of cycles and records a densification wind. It’s possible to upgrade the machine to measure shear during contraction in kN/ m2.
Shear is a dimension parameter useful for more accurate selection or batching and therefore tuning of earth-wettish concretes. For illustration, a veritably small change in water and liquefier can significantly shift the position of the maximum shear value along the contraction wind. An increase in the water and superplasticizer content generally shifts the maximum shear value toward the first gyratory cycles; a reduction in the water and superplasticizer content, on the other hand, shifts the maximum shear value towards the end of contraction.